Home

 

  Kettles & Powered On-Deck Equipment

 

  Powered & Non-Powered On-Deck Equipment
 

  Sheet Metal Equipment
 
Product Listing
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
       
 

Sheet Metal Products

Standard Pittsburgh  •  Heavy-Duty Hand Brakes  •  Bench Mount Hand Brakes  •   Foot Squaring Sheer    •  Cleat Bender  •  Slip rollers  •  Rotary Machine •  Hand Tools
 
 

Standard Pittsburgh

 

Heavy-Duty Hand Brakes

Heavy-Duty Hand Brakes

HB97-18

HB121-18

HB97-16

HB121-16
Capacity, mild steel

18 gauge
1.2 mm

18 gauge
1.2 mm

16 gauge
1.6 mm

16 gauge
1.6 mm
Bending length

97 in.
2464 mm

121 in.
3073 mm

97 in.
2464 mm

121 in.
3073 mm
Maximum lift of beam

1-7/8 in.
47 mm

1-7/8 in.
47 mm

1-7/8 in.
47 mm

2-1/4 in.
57 mm
Front to rear beam adjustment

1/2 in.
13 mm

1/2 in.
13 mm

1/2 in.
13 mm

1/2 in.
13 mm
Minimum reverse bend

1/4 in.
6 mm

1/4 in.
6 mm

1/4 in.
6 mm

1/4 in.
6 mm
Minimum flange in capacity material

1 in.
25 mm

1 in.
25 mm

1 in.
25 mm

1 in.
25 mm
Dimensions
counterweights in place

length

138 in.
3506 mm

159 in.
4039 mm

140 in.
3556 mm

161 in.
4090 mm

width

48 in.
1220 mm

52 in.
1321 mm

52 in.
1321 mm

53 in.
1347 mm

height

59-1/2 in.
1512 mm

60 in.
1524 mm

60 in.
1524 mm

59-1/2 in.
1512 mm

Heavy-Duty Hand Brakes

HB97-18

HB121-18

HB97-16

HB121-16
Top

Bench Mount Hand Brakes


*Shown with optional stand

Bench - Mounted Hand Brakes

HBU48-16

HBS48-16

U48-22

S48-22

Capacity , mild steel

16guage
1.6 mm

16guage
1.6 mm

22guage
0.75 mm

22guage
0.75 mm

Bending length

48-1/4 in.
1225 mm

48-1/4 in.
1225 mm

48-1/4 in.
1225 mm

48-1/4 in.
1225 mm

Maximum depth of box

4 in.
101.7 mm

-------------
---------------

3 in.
76.2 mm

-------------
---------------

Maximum lift of beam

1-1/4 in.
31.75 mm

1-3/4 in.
44 mm

7/8 in.
22.2 mm

7/8 in.
22.2 mm

Front to rear beam adjustment

5/8 in.
16 mm

5/8 in.
16 mm

1/4 in.
6 mm

1/4 in.
6 mm

Minimum reverse bend

1/4 in.
6 mm

1/4 in.
6 mm

5/16 in.
7.9 mm

5/16 in.
7.9 mm

Minimum flange in capacity material

1 in.
25 mm

1 in.
25 mm

3/8 in.
9.5 mm

3/8 in.
9.5 mm

Finger widths

2, 3, 4 in.
51, 76, 101 mm

-------------
---------------

2, 3, 4 in.
51, 76, 101 mm

-------------
---------------

Shipping weight

495 lbs.
224.5 kg

460 lbs.
208.7 kg

280 lbs.
127 kg

220 lbs.
100 kg

Export crate

23.6 cu. ft.
0.67 cu. m

23.6 cu. ft.
0.67 cu. m

17.4 cu. ft.
0.49 cu. m

17.4 cu. ft.
0.49 cu. m

Optional stand, shipping weight

95 lbs.
43 kg

95 lbs.
43 kg

95 lbs.
43 kg

95 lbs.
43 kg

Export crate

2.5 cu. ft.
0.07 cu. m

2.5 cu. ft.
0.07 cu. m

2.5 cu. ft.
0.07 cu. m

2.5 cu. ft.
0.07 cu. m

Bench - Mounted Hand Brakes

HBU48-16

HBS48-16

U48-22

S48-22

 

TENNSMITH
Top
 

Foot Squaring Sheer


 

Foot Squaring Shears

36

52

Maximum shearing capacity, mild steel

16 gauge
1.6 mm

16 gauge
1.6 mm

Maximum shearing capacity, stainless steel

20 gauge
1.0 mm

20 gauge
1.0 mm

Maximum cutting length

37 in.
940 mm

37 in.
940 mm

Back gauge range

30 in.
762 mm

30 in.
762 mm

Front gauge range

37 in.
940 mm

52.25 in.
1327 mm
* Additional Options: Squaring arm, high carbon-high chromium blades & stroke counter
Top

Cleat Bender


* Shown with optional stand
 

Cleat Benders

Model 18

Model 24

Model 30

Maximum capacity
mild steel

20 gauge
1.0mm

20 gauge
1.0mm

20 gauge
1.0mm

Maximum bending

18 in.
457 mm

24 in.
610 mm

30 in.
762 mm

Depth of drive cleat

1/2 in.
12.7 mm

1/2 in.
12.7 mm

1/2 in.
12.7 mm
* Available Option: Heavy Duty Fabricated Stand
Top

Slip rollers


* Shown with optional stand
 

Slip Rolls

SR24

SR36

SR42

Capacity, mild steel

20 gauge
1.0 mm

22 gauge
0.75 mm

24 gauge
0.6 mm

Maximum forming length

24 in.
610 mm

36 in.
914 mm

42 in.
1067 mm

Diameter of rolls

2 in.
51 mm

2 in.
51 mm

2 in.
51 mm

Minimum forming radius

1 in.
25 mm

1 in.
25 mm

1 in.
25 mm

Wire grooves

3/16, 1/4, 5/16 in.
5, 6.5, 8 mm

3/16, 1/4, 5/16 in.
5, 6.5, 8 mm

3/16, 1/4, 5/16 in.
5, 6.5, 8 mm

Slip Roll

SR48

Capacity, mild steel

16 gauge / 1.6 mm

Maximum forming length

49 in. / 1244 mm

Diameter of rolls

3 in. / 76 mm

Minimum forming radius

1-1/2 in. / 38 mm

Wire grooves

3/8, 1/2, 5/8 in. / 9.5, 12.7, 15.8 mm

Gearing ratio

4 : 1
* Available Option: Heavy-Duty fabricated floor stand.

Top

Rotary Machine


 

Name

Part #

Roll Diagram

"A"
1/8"

22100
22101

Turning

"C"

22106
22107

Burring

"D"

22108
22109

Wiring

"E"

22110
22111

Ciring

"F"
3/4"

22113
22114

Ogee Beading

"G"

22115
22116

Single Beading

Rotary Machine

 Model R22
Maximum capacity, mild steel

22 gauge
0.75 mm
throat

7 in.
177mm
Distance, shaft center to center

2 in.
50mm
Shipping weight

67 lbs.
30kg
Export crate

2.14 cu. ft
0.06 cu. m
Top
 

Roofing and Sheet Metal Hand Tools
   

Roofing Tong, Gutter

Roofing Tong, Adjustable

Tool used in turning metal roof edges when making seams and general sheet metal work.  Gutter tongs have an advantage when a deeper fold is required as in making a metal valley or gutter.  Not fitted with guide pins in tong blade.

Adjustments in size made by inserting screw head pins in gage holes in tong blade.  This tool combines five tong sizes into one tong.  well made throughout, with good sized handles.

This type tong can be easily adjusted to turn or bend five different widths of metal, namely 1/2", 3/4", 1" 1 1/4", and 1 1/2".
Item Number Size Throat Length of Blade Length Overall Item Number Size Length of Blade Length Overall
78-A 14" 12" 36" 79-A as listed 18" 28"
   

Hand Roofing Double Seamers

Slater's Hammer

These Seamers are of cast grey iron.  Bottom and sides flat, ground and polished to sizes listed.
NOTE: One side is lower in height than the other to allow for bending and locking seams when making standing seams on metal roofs.

 Item Number 83-B
Finish Polished
Size Head Face 5/8"
Length Overall 12"
Weight Complete, approx. 1lb 4oz
Item Number Height Left Side Height Right Side  
744 3/4" 1"

Slater's Ripper
745 1 1/4" 1 1/2"

Roofing Tong, Common

 Item Number
Length of Blade
Length Overall		 84-A
24"
30"

Slater's Stake

Used for turning metal roof edges when making seams and for general sheet metal work.  Tong is made in seven different sizes as listed.  Tong blade fitted with two screw head guide pins,  gagged for size of fold.

 tem Number
Stock Size
Cutting blade Length		 85-A
1/4 x 1 1/4"
18"
Item Number Size of Fold Length of Blade Length Overall  
77-A 1/2" 18" 28"

 

 
77-B 3/4" 18" 28"
77-C 1" 18" 28"
77-D 1 1/4" 18" 28"
77-E 1 1/2" 18" 28"
77-F 1 3/4" 18" 28"
77-G 2" 18" 28"

Slate Cutter and Trimmer  

 

 

 

A pressed steel tool with guillotine action used to cut slate, mineral fiber shingles or Formica.  Used for cutting smaller pieces to be fitted around chimney or valley of roof, or any other place not requiring a full size shingle or slate.  Cutting blade is specially heat treated to withstand tough use.  Removable punch is included.  Two pieces of angle iron can be fitted to bottom section by means of predrilled screw holes at option of user.  This provides for greater stability of piece being cut.  As featured in Time-Life book series.

Item Number                     95-A           95-B             95-P
Overall Length                  25"       Blade Only      Punch Only
Weight                               5lbs
Cutting Blade Length        4"

Roofing Double Seamer

 

 


 
The well known "Burritt" Model Roofing Double Seamer is especially designed and adapted for forming  standing and double lock seams on tin and galvanized roofing.  Locks are finished of uniform height.  Simple construction yet built  strongly of Malleable Iron.  Center and outside bars finely machined to make well formed lock seams evenly and without crimping.  Seamers No. 444-A follow 1 1/4" and 1 1/2" Common Roofing Tongs Finishing a standing lock seam 1" high.  Roofing Tongs finishing a standing lock seam 1" high.  Seamers No. 466-A follow 1 1/2"  and 1 3/4" Common Roofing Tongs  finishing a standing lock seam 1" high.  Please specify by item number when ordering.  Each seamer has man size, well shaped "D" handles that are securely riveted on to a 1" iron pipe handle.

Seamers have double treadle and strong springs, making for easy operation.

No confusing change of gauges required.  No loss of time, two workmen may work at the same time in forming and finishing lock seams from end to end and against corners, ridges, walls, parapets and copings.

Stortz Seamers are sold in sets of two pairs.  Item No. 444-A is fitted for I. C. Tin and Item No. 466-A is fitted Iron Roofing not heavier than 26 gauge.  Single pairs may be purchased.  Please specify item number when ordering.
444-A Complete set of two pairs
444-B First Pair-bar number 3&5
444-C Second Pair-bar number 4 & 6
466-A Complete set of two pairs
466-B First pair bar number 3&5  
466-C second pair bar number 4&6  
   

 
Top

 
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
  Website property of Roofing Tools and Equipment Co. 2002 - All Product  Names are property of their Company.
Website Designed and Maintained by Anthony Web Design