Kettles & Powered On-Desk Equipment sold by Roofing Tools & Equipment Co Inc

140 Gallon SINGLE BURNER DRAW KETTLE

	One Lp Burner (100 & 140-No.2, 200-No. 3) or one kerosene burner (100-BK-45, 140-BK50, 200-BK-60)
	75R14 4 ply tires (100-140)
	700-14LT 6 ply tires (200)
	loading height 42" (all sizes)
	standard pin type hitch
	2 1/2" stem type thermometer
	Drop Leg Jack (100 single draw kettle)
	Combo jack (140-200 draw kettels)
	Weight 100-800, 140-900, 200-1,250 lbs
	STANDARD FEATURES

200- 265 Gallon SINGLE BURNER PUMP KETTLE

	9 HP Honda Engine with 6 to 1 reduction gear
	35 GPM Vican Pump
	One No. 3 LP Burner or one BK-60 kerosene burner (310-BK-65)
	Electric brakes with breakaway switch installed
	700-15LT 6 ply tires
	loading height 40"/40"
	Adjustable Hitch
	4" stem type thermometer
	Combo jack w/ 8"caster
	Weight 1,900bs./2,000 lbs
	STANDARD FEATURES

Top

380 Gallon DOUBLE BURNER PUMP KETTLE

Two no. 2 LP burners or two BK-55 kerosene burners

Electric brakes with breakaway switch installed

700-15LT 8 ply tires

Rear drop leg for leveling

Combo jack with 8" caster

loading height 41"

Weight 2,300 lbs.

STANDARD FEATURES

450 Gallon DOUBLE BURNER PUMP KETTLE

Two No. 2 LP burners (550-No. 3) or two BK-60 kero burners (550-BK-65)

Tandem axle running gear

Electric brakes installed on both axles with breakaway switch

Combo jack

loading height 41"/ 48"

700-15LT 6 ply tires

Weight 2,700 lbs./ 2,900 lbs.

STANDARD FEATURES

Top

650-750 Gallon DOUBLE BURNER PUMP KETTLE

Two No. 3 LP burners or two BK-65 kerosene burners

Tandem axle running gear

Electric brakes installed on both axles with breakaway switch

Combo jack

loading height 48"/ 51"

700-15LT 8 ply tires

Weight 3,100 lbs./ 3,200 lbs.

STANDARD FEATURES

1000 Gallon DOUBLE BURNER PUMP KETTLE

Two No. 3 LP burners

Triple axle running gear

Electric brakes installed on All Axles with breakaway switch

Hi-Lo semi-automatic controls

Heavy duty adjustable pin-type hitch.

Combo jack

loading height 52"

700-15LT 8 ply tires

Weight 4,250 lbs.

Top

STANDARD FEATURES

Top

Standard Features On All Reeves' Single Burner Kettles

1 1/2" insulation 1000º resistance

2 1/2" cast iron drain cock

25' LP gas hose and regulator

Rear drop leg for leveling

Stop, tail, and turn lights

Two 4' safety chains with hooks

Fold over rain cover

Highway rated running gear

Standard Features On All Reeves' Double Burner Kettles

9 HP Honda Engine w/ 6 to 1 reduction gear

Heavy duty adjustable pin-type hitch

35 GPM Vican pump

Two 4' safety chains with hooks

1 1/2" insulation 1000º resistance

Highway rated running gear

Stop, tail, and turn lights

8" stem type thermometer

Fold over rain cover

25' LP gas hose and regulator

2 1/2" cast iron drain cock

Electric brakes installed on All Axles

Top

Powered On-Deck Equipment

"TWISTER" POWERED ROOF RIPPER

9 Hp Honda Engine

Rugged heavy duty hydraulic drive system for reliable and precise control

3.7 Gal. hydraulic reservoir (14 liters) for cooler operating temperatures and extended equipment life

Easy to operate forward and reverse and blade actuator controls

Reciprocating (front to back motion) 21" wide hardened tear-off blade with single handle control

Dead -man engine cut off safety switch

Easy to operate parking disk brake

Easy blade change (only 4 bolts)

Two position blade-unbolt blade and flip over for a different angle

Drive wheels -16 x 5" solid rubber flat surface Chevron Tread tires for positive traction

Length-90", width 33", height-44"

Weight 600 lbs.

Single Blade ROOF CUTTER

9 HP Vanguard Briggs & Stratton® Engine

Also available with 9 HP Honda Engine

12" carbide tip blade

Heavy duty body w/1" shaft & bearings.

Two rear 12 x 3" semi pneu. tires

Front 10 x 2.75" semi-pneu. tires

Adjustable cutting depth to 3 1/2" (using 12" blade) with floating blade cover

Weight 230 lbs.

Top

Heavy Duty Single Blade ROOF CUTTER

11 HP Honda Engine

12" carbide tip blade

Heavy duty body w/1 1/4" shaft & bearings.

Two rear 12 x 3" semi pneu. tires

Front 10 x 2.75" semi-pneu. tires

Adjustable cutting depth to 3 1/2" (using 12" blade) with floating blade cover

Weight 250 lbs.

Available with 13 HP Honda

Available with 16 HP Vanguard w/ electric start

Available with 20 HP Kohler w/ electric start

Two 12" carbide tip blades

Adjustable cutting depth to 3 1/2" (using 12" blade) with floating blade covers

Two rear 12 x 3" semi pneu. tires

Two front 10 x 2.75" semi-pneu. tires

Handy throttle control (16 & 20 HP)

Weight 285 lbs.

Cuts are 24" inches apart

Top

SUPER-TEX

$Super-Tex #180$

10.5 HP/IC Briggs & Stratton® Engine

Also available with 11 Hp Honda

12" solid steel flywheel

Four carbide tip cutting blades

Double belts and pulleys for extra power

Inset rear wheel for close up work

Single lever disengaging rod

Hand adjustable cutting height

Pulley enclosed in safety shroud

12" cutting path

8 x 2.50" semi-pneu. tires front and rear for easy maneuverability

Lifting bar for handling ease

Weight 225 lbs.

BIG-TEX

$Super-Tex #180$

6 HP/IP Briggs & Stratton® Engine

Also available with 5.5 Hp Honda

12" solid steel flywheel

Four carbide tip cutting blades

Inset rear wheel for close up work

Single lever disengaging rod

Hand adjustable cutting height

Pulley enclosed in safety shroud

Easy to use throttle control

12" cutting path

8 x 2.50" semi-pneu. tires front and rear for easy maneuverability

Lifting bar for handling ease

Weight 200 lbs.

Self Propelled Power Broom

		5 HP Briggs & Stratton® Quantum Engine
		18" diameter x 36" long poly. or poly/wire brush
		Sweeps left, right or straight ahead
		Deadman type controls
		Chain driven power drive
		Belt driven brush
		Single hand control
		Anti-reverse device
		Metal brush cover
		Two 4.10 x 3.50 x 4" pneumatic tires
		Weight 240 lbs

Top